S2 Conversion kit - Build help page 2.

Battery tray

Attach the complete battery tray to the chassis using the two large locknuts and countersunk screws at the front
and the small locknut and countersunk at the rear. Position the battery tray in the middle holes to start with, if
your cells are a tight fit, had a washer between the battery tray and plastic strap to give a little extra space.

**Tip** moving the cells can have a large effect on the handling of the car due to the amount of weight you are
moving. As a general rule if you move the tray to the front position you will get more steering, in the rear position
more rear end grip, and the mid position is a nice balance between the two.

Gearbox

Fit the two small countersunk screws into the positions shown above in the left gearbox casing, add a spacer to each
screw on the outside and a dab of thread lock, now locate the two holes on the B4 motor plate and screw together.

Goto Page 3